Pricing

Free Quote

THIS IS AN EXAMPLE OF A TYPICAL SIMPLE PUMP SYSTEM

Request a free quote here

Carefully consider what you are receiving for your investment dollar.

Ask yourself one question. In an emergency situation, or on an on-going basis, do you want to pump your water into a bucket and then haul it into your house……or do you want the ability to pump water directly into your home’s pressure tank, and from there to every tap, toilet and sink in your home? Would you rather wash your hands in your sink with water from your faucet or from the bucket?

Simple Pump™ is the only hand operated pump that gives you full use of all your home’s taps, toilets and plumbing fixtures, even from deep wells.

There are plenty of cheaper pumps on the market, but they won’t pump water from very deep wells. Simple Pump™ will pump water from as deep as 325 feet below the surface. With cheap pumps, most (if not all) of their parts are made from plastic. The vast majority of the Simple Pump™ metal components are CNC machined from aircraft quality stainless steel.

Of course, you can find other ‘serious’ pumps somewhat similar to the Simple Pump. And granted, those ‘serious’ pumps are more substantially built with better materials than the cheap pumps. But most can only pump into a bucket or a non-pressure tank. And all our competitors are from 25% to 50% more expensive than the Simple Pump™!

See here for more details on pricing considerations.

We are extremely confident that if you do your homework and compare detail to detail, you’ll find no other pump comes close to Simple Pump in any significant category.

 

The Simple Pump hand-operated well water pump. Shown mounted on 8" well cap.

PRICING FOR A TYPICAL SIMPLE PUMP SYSTEM

Assuming a 100 foot deep well with a static water level at 50 feet
Shipping to the lower 48 states. (Virginia customers must add sales tax.)
Your quote would be customized to your well’s specifications.

Number
Item
Cost
1 Simple Pump™ Pump Head Assembly
$650
1 24″ Handle Assembly
$80
1 6″ Well Cap
$120
1 Top Drop Pipe Kit with weep hole to freeze-proof
$55
9 Drop Pipe Kit – 9 sections of 9 feet each.
$495
1 5 gallon per minute (GPM) Pump Cylinder
$450
1 Check Valve with Pressure Gauge
To pump into your pressure tank or uphill.
$75
1 Spare seal kit
$30
1 Safety Tool for installation
$28
HAND-OPERATED SIMPLE PUMP
$1,983
FedEx Ground
$165
TOTAL
$2,148

Optional Additional Purchase

WELL WATCH 660 by Eno Scientific
Water level measurement and monitoring
– Purchase: $499. For ongoing monitoring of water level.
– One-time rental: $150. For initial water level measurement to get quote.

Request a free quote here.

Comments are closed.