Simple Pump™ is made completely from lead-free, CNC-machined stainless steel and aluminum components. (Aluminum is never in contact with water.)
All components are Safe Drinking Water Act compliant.
Simple Pump™ is designed with very few points of wear: the u-cup seals on the piston and the rod seals in the pump head.
With normal use, your maintenance expenses average only $5 per year!
|Pump assembly||CNC-machined 303 stainless steel|
|Pump head||CNC-machined 303 stainless steel|
|Pump cylinder||CNC-machined 303 stainless steel|
|Ball seats||CNC-machined 304 stainless steel|
|Spigot nipple||CNC-machined 304 stainless steel|
|3/4″ Rod||CNC-machined 304 stainless steel|
|Pump lever arm, linkage, brackets, clevis||T6061 Aircraft Aluminum|
|Sucker rods||High-tensile fiberglass with fused 304 stainless steel ends|
|Drop pipe||Polyvinyl Chloride (PVC), Schedule 120|
|Rod guide||HDPE (high density polyethylene)|
|Piston||CNC-machined Food-Grade PVC|
|Working U-cup seals||Urethane|
|Static O-rings||70D Buna-N Rubber|
TENCOM Polyester Fiberglass Rod Specifications
|Approximate fiber percentage:||55%|
|Approximate resin percentage:||45%|
|Tensile Strength:||80,000 psi|
|Tensile Modulus:||4.0×10^6 psi|
|Flexural Strength:||80,000 psi|
|Flexural Modulus:||4.0×10^6 psi|
|Compressive Strength:||40,000 psi|
|Temperature range:||-45 to +240 degrees F|
Available in 2″, 4″, 4.5″, 5″, 6″, 6.25″ and 7″/8″ diameters. (Details here.)
Standard sucker rods are manufactured to a 108″ length. Rods also available in 54″ and 27″ lengths.
Schedule 120 PVC, with bell-end, screw in joints. (No gluing.) Top drop pipe comes standard with a 1/16″ diameter weep drilled into the sidewall of the PVC pipe, 48″ below the top. For areas with deeper freezing levels, the weep hole will be drilled at any desired level at no charge. In no-frost installations, the weep hole can be deleted at no charge.
Motor Extension: 12v or 24v
Motor can be powered by a solar panel, battery or other 12v or 24v DC source. Can pump from water levels down to 225′.